SECTION 12495
INSOLROLL 2000 SOLAR SCREEN SHADES
PART 1 GENERAL
1.01 SECTION INCLUDED
Insolroll 2000 Solar Screen Shades to be custom manufactured
to conform with site requirements.
Provide all accessories, attachment hardware, labor, and equipment
necessary to complete
installation of this section.
1.02 REFERENCES
A. Flame retardant materials used shall meet the requirements
of the National Fire Protection Association (NFPA) 701 Flame Test
and California U.S. Title 19.
1.03 SUBMITTALS
A. Submit manufacturers descriptive literature indicating
materials, finishes, construction and installation instructions
and data verifying that the product meets requirements specified.
B. Shop drawings to indicate all fasteners,
installation methods and clearances at head, jamb and sill for
each mounting condition.
C. Samples to be submitted in sizes no less than 12" in length
for colored materials. Submit a sample of all exposed surfaces
and accessories needed to complete the installation. Color samples
to be submitted to the architect for selection.
D. Submit all quality assurance documents relative to the
installation, including design data, test reports, certificates
issued by Underwriters Laboratory, manufacturer's instructions,
manufacturers installation instructions and close-out submittal
documents if available.
1.04 DELIVERY, STORAGE AND HANDLING
A. Deliver to project site in manufacturer's original packaging.
B. Handle and store to prevent damage to materials, finishes
and operating mechanisms.
C. All materials delivered to the site shall remain the property
of the manufacturer until installation is complete and final payment
is received.
1.05 PROJECT CONDITIONS
A. Prior to any materials being installed, the building shall
be enclosed.
B. All interior finishes are to be completed and dry prior
to any material installation.
1.06 SEQUENCING
A. Installation of all materials included
in this section to be coordinated and complete prior to
furniture placement on floor surface.
1.07 WARRANTY
A. Provide manufacturer's standard five( 5)
year limited warranty against defects in materials and workmanship,
beginning at date of substantial completion.
PART 2 PRODUCTS
2.01
A. Manufacturer: Insolroll Window Shading Systems
637 S. Pierce Ave. Louisville, CO 80027 800-447-5534
B. Insolroll 2000 Solar Screen Shades are available
with manual or motorized operation and a variety of solar
screen shading fabrics. Accessories are available as suitable
for application.
2.02 MANUAL OPERATING SYSTEM
A. Adjustment-free system shall be provided that is
controlled by a nickel plated, steel ball chain or plastic
bead chain on polyester cord. The clutch system shall be
comprised of multi-banded steel springs that create the
pressure necessary to keep the shade in the desired position.
Three clutch sizes ( 8, 16 or 24 lbs. ) are available for
operational flexibility. Clutches are asymmetrical for right
or left hand installation.
B. Roller tube shall be roll formed steel or extruded
aluminum. Roller tube to be sized appropriately to minimize
deflection.
C. Fabric to be attached to roller tube using two sided
adhesive tape that allows for easy adjustment of fabric
for leveling and removal of fabric panel without removing
brackets.
D. Bottom hem of shade to be RF heat sealed pocket with
enclosed hem bar.
2.03 MOTORIZED OPERATING SYSTEM
A. Motor shall be tubular type mounted
inside the shade tube and operate on 110 volts. Motor is
to have a self-contained limit and thermal overload switch.
Internal limits shall determine the full-up and full-down
position of the shade.
B. Switches and controls available for
individual or group control of motors, remote operation
or interface with automation systems.
2.04 SHADE ACCESSORIES
A. Extruded aluminum 3" and 4" fascia snaps onto the
mounting brackets. Fascia is available in white and bronze.
B. Extruded aluminum 4 1/2" pocket available in white and
bronze
C. 5" x 4 3/4" extruded aluminum ceiling pocket with
access flap is available in white only
D. Access flap with hanger is available for bottom closure
of site built pockets in white only.
E. Custom dual shade pocket
2.05 SOLAR SCREEN FABRICS
A. Phifer SheerWeave 4000 woven vinyl coated polyester
yarns ( 5% openness )
B. Phifer SheerWeave 4100 woven vinyl coated polyester
yarns ( 10% openness )
C. Phifer SheerWeave 4400 woven vinyl coated polyester
yarns ( 3% openness )
D. Phifer SheerWeave 4800 woven vinyl coated polyester
yarns ( 1% openness )
E. Phifer SheerWeave 3000 woven fiberglass & polyester
yarns ( 14% openness )
F. 3G Mermet E Screen 4100 woven vinyl coated fiberglass
yarns ( 5% openness )
G. 3G Mermet E Screen 4110 woven vinyl coated fiberglass
yarns ( 10% openness )
H. 3G Mermet M Screen 5100 woven vinyl coated fiberglass yarns
(twill weave- 5% openness)
I. 3G Mermet XL 2 Screen 5110 woven vinyl coated fiberglass
yarns (twill weave-10% openness)
PART 3 EXECUTION
A. Site inspection and preparation shall
be the responsibility of the shade installer. The approval
of all mounting surfaces, installation positioning within
and around all openings and measurements shall be approved
by architect and the blind installer.
C. Install all blinds in windows level and plumb and in
accordance with manufacturer's product data and approved shop
drawings.
D. Occasional cleaning using a mild detergent, brushing
and rinsing.
E. Any adjustments needed to units after
the installation are the responsibility of the installer and
will be performed free of charge for a period of one year.
SECTION 12495
INSOLROLL 2000 BLACKOUT SHADES
PART 1 GENERAL
1.01 SECTION INCLUDED
Insolroll 2000 Blackout Shades to be custom manufactured
to conform with site requirements.
Provide all accessories, attachment hardware, labor, and equipment
necessary to complete
installation of this section.
1.02 REFERENCES
A. Flame retardant materials used shall
meet the requirements of the National Fire Protection Association
(NFPA) 701 Flame Test and California U.S. Title 19.
1.03 SUBMITTALS
A. Submit manufacturers descriptive literature indicating
materials, finishes, construction and installation instructions
and data verifying that the product meets requirements specified.
B. Shop drawings to indicate all fasteners,
installation methods and clearances at head, jamb and sill
for each mounting condition.
C. Samples to be submitted in sizes no less than 12'
in length for colored materials. Submit a sample of all
exposed surfaces and accessories needed to complete the
installation. Color samples to be submitted to the architect
for selection.
D. Submit all quality assurance documents relative to
the installation, including design data, test reports, certificates
issued by Underwriters Laboratory, manufacturer's instructions,
manufacturers installation instructions and close-out submittal
documents if available.
!.04 DELIVERY, STORAGE AND HANDLING
A. Deliver to project site in manufacturer's original
packaging.
B. Handle and store to prevent damage to materials,
finishes and operating mechanisms.
C. All materials delivered to the site shall remain
the property of the manufacturer until installation is complete
and final payment is received.
1.05 PROJECT CONDITIONS
A. Prior to any materials being installed, the building shall
be enclosed.
B. All interior finishes are to be completed and dry prior
to any material installation.
1.06 SEQUENCING
A. Installation of all materials included
in this section to be coordinated and complete prior to
furniture placement on floor surface.
1.07 WARRANTY
A. Provide manufacturer's standard five (
5) year limited warranty against defects in materials and workmanship,
beginning at date of substantial completion.
PART 2 PRODUCTS
2.01
A. Manufacturer: Insolroll Window Shading Systems
637 S. Pierce Ave. Louisville, CO 80027 800-447-5534
B. Insolroll 2000 Blackout Shades are available with
manual or motorized operation and a choice of two fabrics.
Accessories are available as suitable for application.
2.02 MANUAL OPERATING SYSTEM
A. Adjustment-free system shall be provided that is
controlled by a nickel plated, steel ball chain or plastic
bead chain on polyester cord. The clutch system shall be
comprised of multi-banded steel springs that create the
pressure necessary to keep the shade in the desired position.
Three clutch sizes ( 8, 16 or 24 lbs. ) are available for
operational flexibility. Clutches are asymmetrical for right
or left hand installation.
B. Roller tube shall be 1 3/8" roll formed steel or 2"
extruded aluminum. Roller tube to be sized appropriately to minimize
deflection.
C. Fabric to be attached to roller tube using two sided
adhesive tape that allows for easy adjustment of fabric
for leveling and removal of fabric panel without removing
brackets.
D. Bottom hem of shade to be RF heat sealed pocket with
enclosed hem bar.
2.03 MOTORIZED OPERATING SYSTEM
A. Motor shall be tubular type mounted
inside the shade tube and operate on 110 volts. Motor is
to have a self-contained limit and thermal overload switch.
Internal limits shall determine the full-up and full-down
position of the shade.
B. Switches and controls available for
individual or group control of motors, remote operation
or interface with automation systems.
2.04 SHADE ACCESSORIES
A. Extruded aluminum 3" and 4" fascia snaps onto the mounting
brackets. Fascia is available in white and bronze or clear anodized.
B. Extruded aluminum 3 1/4" pocket available in white and
clear anodized.
C. 5" x 4 3/4" extruded aluminum ceiling pocket with
access flap is available in white only
D. Access flap with hanger is available for bottom closure
of site built pockets in white only.
E. Custom dual shade pocket
F. 2 '/2" side tracks available in white and bronze
- when added to Blackout Shade System the system becomes
light proof for audio-visual applications
2.05 BLACKOUT SHADE FABRICS
A. Insolroll 14 oz per sq./yd Fiberglass Room Darkening
Fabric
Fire retardant fabric available in 5 standard colors
B. 30 Mermet Flocke Fiberglass/Acrylic Blackout Fabric
Fire retardant fabric available in 10 standard colors
PART 3 EXECUTION
A. Site inspection and preparation shall
be the responsibility of the shade installer. The approval
of all mounting surfaces, installation positioning within
and around all openings and measurements shall be approved
by architect and the blind installer.
C. Install all blinds in windows level and plumb and in
accordance with manufacturer's product data and approved shop
drawings.
D. Occasional cleaning using a mild detergent, brushing
and rinsing.
- Any adjustments needed to units after the installation are
the responsibility of the installer and will be performed free
of charge for a period of one year.
INSOLROLL WINDOW SHADING SYSTEMS, INC.
637 S. PIERCE AVE., LOUISVILLE CO. 80027
PH:800-447-5534, FAX:303-665-1209
